Xtium2-CLHS PX8 User's Manual CamExpert Quick Start • 29
Using CamExpert with Xtium-CLHS PX8
The Sapera CamExpert tool is the interfacing tool for Xtium-CLHS PX8 frame grabbers and
connected cameras; it is supported by the Sapera library and hardware. CamExpert allows a user
to test frame grabber and camera functions. Additionally CamExpert saves the frame grabber
settings configuration as individual camera parameter files on the host system (*.ccf).
When an acquisition server is selected, CamExpert only presents parameters supported by the
selected device.
The Xtium-CLHS PX8 firmware supports one Camera Link HS camera and provides the following
acquisition servers:
Firmware Acquisition Servers
Camera Link HS
(default configuration)
Depending on the selected server, different parameters may be displayed. For example, with an
RGB acquisition server, the Color Type parameter is not displayed since its value is not
configurable.
For more information, see the Sapera Servers and Resources section.
To Next Page
Loading...