18 • Installing Xtium2-CLHS PX8 Xtium2-CLHS PX8 User's Manual
Executing the Firmware Loader from the Start Menu
If required, the Xtium2-CLHS PX8 Firmware Loader program is executed via the Windows Start
Menu shortcut Start • Programs • Teledyne DALSA • Xtium2-CLHS PX8 Driver • Firmware
Update. A firmware change after installation would be required to select a different configuration
mode. See User Programmable Configurations.
Figure 3: Start Menu Firmware Update Shortcut
A firmware change after installation is required to select a different configuration mode, if
available; see User Programmable Configurations.
To Next Page
Loading...