Dalsa Xtium2-CLHS PX8 - Parameter Reference

Xtium2-CLHS PX8 User's Manual Xtium2-CLHS PX8 Reference • 57
Xtium2-CLHS PX8 Supported Parameters
The tables below describe the Sapera capabilities supported by the Xtium2-CLHS PX8. Unless
specified, each capability applies to all configuration modes and all acquisition modes.
The information here is subject to change. The application needs to verify capabilities. New board
driver releases may change product specifications.
Sapera describes the Xtium2-CLHS PX8 family as:
• Board Server: Xtium2-CLHS_PX8_1
• Acquisition Module: dependent on firmware used
Camera Related Capabilities
Capability Values
CORACQ_CAP_CONNECTOR_TYPE CORACQ_VAL_CONNECTOR_TYPE_CLHS (0x10)
Camera Related Parameters
Parameter Values
CORACQ_PRM_CHANNEL CORACQ_VAL_CHANNEL_SINGLE (0x1)
CORACQ_PRM_FRAME CORACQ_VAL_FRAME_PROGRESSIVE (0x2)
CORACQ_PRM_INTERFACE CORACQ_VAL_INTERFACE_DIGITAL (0x2)
CORACQ_PRM_SCAN CORACQ_VAL_SCAN_AREA (0x1)
CORACQ_VAL_SCAN_LINE (0x2)
CORACQ_PRM_SIGNAL CORACQ_VAL_SIGNAL_DIFFERENTIAL (0x2)
CORACQ_PRM_VIDEO Mono
RGB
CORACQ_VAL_VIDEO_MONO (0x1)
CORACQ_VAL_VIDEO_BAYER (0X10)
CORACQ_VAL_VIDEO_RGB (0x8)
CORACQ_PRM_PIXEL_DEPTH
Mono
RGB
8 bits, # LUT = 1, LUT format = CORDATA_FORMAT_MONO8
8 bits, # LUT = 1, LUT format = CORDATA_FORMAT_MONO16
10 bits, # LUT = 1, LUT format = CORDATA_FORMAT_MONO8
10 bits, # LUT = 1, LUT format = CORDATA_FORMAT_MONO16
12 bits, # LUT = 1, LUT format = CORDATA_FORMAT_MONO8
12 bits, # LUT = 1, LUT format = CORDATA_FORMAT_MONO16
14 bits, # LUT = 0, LUT format = CORDATA_FORMAT_MONO16
16 bits, # LUT = 0, LUT format = CORDATA_FORMAT_MONO16
8 bits, # LUT = 1, LUT format = CORDATA_FORMAT_COLORNI8
CORACQ_PRM_VIDEO_STD CORACQ_VAL_VIDEO_STD_NON_STD (0x1)
CORACQ_PRM_FIELD_ORDER CORACQ_VAL_FIELD_ORDER_NEXT_FIELD (0x4)
CORACQ_PRM_HACTIVE min = 32 pixel
max = 65536 pixels
step = 32 pixel
* minimum is per lane
CORACQ_PRM_VACTIVE min = 1 line
max = 16777215 line
step = 1 line
CORACQ_PRM_TIME_INTEGRATE_METHOD
CORACQ_VAL_TIME_INTEGRATE_METHOD_10 (0x200)
CORACQ_VAL_TIME_INTEGRATE_METHOD_11 (0x400)
CORACQ_VAL_TIME_INTEGRATE_METHOD_12 (0x800)
CORACQ_PRM_CAM_TRIGGER_METHOD CORACQ_VAL_CAM_TRIGGER_METHOD_3 (0x4)
CORACQ_PRM_CAM_NAME Mono
RGB
Default Camera Link HS Line Scan Mono
Default Camera Link HS Line Scan Color
CORACQ_PRM_LINE_INTEGRATE_METHOD
CORACQ_VAL_LINE_INTEGRATE_METHOD_8 (0x80)
CORACQ_VAL_LINE_INTEGRATE_METHOD_9 (0x100)
CORACQ_VAL_LINE_INTEGRATE_METHOD_10 (0x200)
CORACQ_PRM_LINE_TRIGGER_METHOD CORACQ_VAL_LINE_TRIGGER_METHOD_2 (0x2)