102 AK2-SC 255 Reference Manual RS.8D.M1.22
hours as configured in the Store Info screen.
Unoccupied setpoint (0.0 to 150.0) The cooling setpoint during store closed
hours as configured in the Store Info screen.
Lockout below ambient (0.0 to 150.0) The outside ambient temperature below
which cooling will be locked out.
Delay between stages (0 to 99) The number of minutes after the start of a
cooling stage before the next stage can start. Also, the
minimum on time for every stage.
ClimaTECH
heating configuration There are two pages of settings for heating configuration:
Num of heat rclm stages (0 to 4) The number of heat reclaim stages.
Occupied setpoint (0.0 to 150.0) The heat reclaim setpoint during operat-
ing hours as configured in the Store Info screen.
Unoccupied setpoint (0.0 to 150.0) The heat reclaim setpoint during store
closed hours as configured in the Store Info screen.
Lockout above ambient (0.0 to 150.0) The outside ambient temperature above
which heat reclaim will be locked out.
Delay between stages (0 to 99) The number of minutes after the start of a
heat reclaim stage before the next stage can start.
Also, the minimum on time for every stage.
Heat reclaim flush start (Time of day field) The time for heat reclaim flush to
begin each day.
Flush duration (0 to 99) The number of minutes’ duration for each
heat reclaim flush.
Number of aux heat stages (0 to 4) The number of configured auxiliary heat
stages in the HVAC unit.
Occupied setpoint (0.0 to 150.0) The zone temperature setpoint for
auxiliary heat during operating hours as configured in
the Store Info screen.
Unoccupied setpoint (0.0 to 150.0) The zone temperature setpoint for
auxiliary heat during store closed hours as configured
in the Store Info screen.
To Next Page
Loading...
Need help?
General
