To Next Page

To Previous Page

RS.8D.M1.22 AK2-SC 255 Reference Manual 13

1 - 2. Configuring Refrigeration

There are two “routes” you may need to navigate to begin configuring refrigeration.

One begins by selecting Refrigeration from the Main menu, and the other by

selecting Configuration.

Starting with a

Partially Configured

AK2-SC 255 If the AK2-SC 255 you are working with was supplied with a rack, the controller may

have been partially configured by the rack manufacturer. In that case, when you

select Refrigeration from the Main Menu, the SC 255 will display the Refrigeration

Menu (left). It lists the rack or racks that are partly configured. If you want to

change or add to the configuration of one of these racks, move the cursor to the rack

name and press ENTER. The Rack menu (right) will appear. In this example, only

one rack has been previously configured.

Select Configure Rack and the Configure Rack menu appears.

Now select the type of information you want to supply. We’ll cover a typical cat-

Danfoss AK2-SC 255 User Manual

Other manuals for Danfoss AK2-SC 255