RS.8D.M1.22 AK2-SC 255 Reference Manual 157
PART TWO
Using the Status Screens and Service Functions
Using an AK2-SC 255 system is simple and is best learned at the controller or by
using AKA 65 Network Supervisor software to examine a real system. Everything
starts at the Main Menu. You can get the Main Menu, if it isn’t the screen you see on
the controller, by pressing the MENU key.
Here’s the Main Menu:
Authorization –
“Just Looking”
If you are just looking at information in the system, you may not need to enter an
authorization code before moving on, depending upon the system owner’s wishes. The
system may allow you to browse and look at the status screens, or it may require an
authorization code just to look. If the owner has decided to tightly limit access to the
system’s information, you will se a screen like this:
To Next Page
Loading...
