Danfoss VLT AutomationDrive FC 301

Parameter Setting
14-01 Switching Frequency Higher operating switching frequency than specified by the individual filter is not recommended.
14-55 Output Filter [0] No Filter
14-56 Capacitance Output Filter Not used
14-57 Inductance Output Filter Not used
Table 7.30 Parameter Settings for dU/dt Filter Operation
How to Order
VLT
®
AutomationDrive FC 301/FC 302 Design Guide, 0.25-75 kW
106 MG33BF02 - Rev. 2013-12-20
77