Danfoss VLT AutomationDrive FC 301 Design Guide

Contents
1 Introduction
8
1.1 Purpose of the Design Guide
8
1.2 Additional Resources
8
1.3 Abbreviations, Symbols and Conventions
8
1.4 Definitions
9
1.5 Document and Software Version
10
1.6 Regulatory Compliance
10
1.6.1 CE Mark 10
1.6.1.1 Low Voltage Directive 10
1.6.1.2 EMC Directive 10
1.6.1.3 Machinery Directive 11
1.6.2 UL Compliance 11
1.6.3 C-tick Compliance 11
1.6.4 Marine Compliance 11
1.7 Disposal Instruction
11
1.8 Safety
11
2 Safety
12
2.1 Safety Symbols
12
2.2 Qualified Personnel
12
2.3 Safety Precautions
12
3 Basic Operating Principles
14
3.1 General
14
3.2 Description of Operation
14
3.3 Sequence of Operation
14
3.3.1 Rectifier Section 14
3.3.2 Intermediate Section 14
3.3.3 Inverter Section 14
3.3.4 Brake Option 14
3.3.5 Load Sharing 15
3.4 Control Interface
15
3.5 Wiring Schematic
16
3.6 Controls
18
3.6.1 Control Principle 18
3.6.2 FC 301 vs. FC 302 Control Principle 19
3.6.3 Control Structure in VVC
+
20
3.6.4 Control Structure in Flux Sensorless (FC 302 only) 21
3.6.5 Control Structure in Flux with Motor Feedback (FC 302 only) 22
Contents
VLT
®
AutomationDrive FC 301/FC 302 Design Guide, 0.25-75 kW
MG33BF02 - Rev. 2013-12-20 1

Danfoss VLT AutomationDrive FC 301 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 301
Category	DC Drives
Language	English