Danfoss VLT AutomationDrive FC 301

NOTICE
The back plate is relevant for A4, A5, B1, B2, C1 and C2
only.
130BA219.11
1
1 Back plate
Illustration 8.3 Mounting on a non-solid Back-wall requires a
Back Plate
For frequency converters with IP66 take extra care to
maintain the corrosive-resistant surface. A fibre washer or a
nylon washer may be used to protect the epoxy coating.
130BA392.11
2
1
3
4
1
Back plate
2 IP66 frequency converter
3 Base plate
4 Fibre washer
Illustration 8.4 Mounting on a Non-solid Back Wall
Mechanical Installation
VLT
®
AutomationDrive FC 301/FC 302 Design Guide, 0.25-75 kW
MG33BF02 - Rev. 2013-12-20 111
8 8