Danfoss VLT AutomationDrive FC 301

Place the frequency converter in the lower bracket, lift the
upper one. When the frequency converter is in place,
lower the upper bracket.
Step 4
130BA847.10
Illustration 11.33 Tightening of Screws
Now tighten the screws. For extra security, drill and mount
screws in all holes.
Options and Accessories
VLT
®
AutomationDrive FC 301/FC 302 Design Guide, 0.25-75 kW
MG33BF02 - Rev. 2013-12-20 175
11 11