Danfoss vlt FC 102 Programming Guide

15-31 Alarm Log: Value
Array [10]
Range: Function:
0* [-32767 -
32767 ]
View an extra description of the
error. This parameter is mostly used
with alarm 38, internal fault.
15-32 Alarm Log: Time
Array [10]
Range: Function:
0 s* [0 -
2147483647 s]
View the time when the logged
event occurred. Time is measured in
s from frequency converter start-up.
15-33 Alarm Log: Date and Time
Array [10]
Range: Function:
Size
related*
[ 0 - 0 ] Array parameter; Date & Time 0–9:
This parameter shows when the
logged event occurred.
3.15.5 15-4* Drive Identication
Parameters containing read-only information about the
hardware and software conguration of the frequency
converter.
15-40 FC Type
Range: Function:
0* [0 - 6 ] View the FC type. The readout is
identical to the frequency converter
series power eld of the type code
denition, characters 1–6.
15-41 Power Section
Range: Function:
0* [0 - 20 ] View the FC type. The readout is
identical to the frequency converter
series power eld of the type code
denition, characters 7–10.
15-42 Voltage
Range: Function:
0* [0 - 20 ] View the FC type. The readout is
identical to the frequency converter
series power eld of the type code
denition, characters 11–12.
15-43 Software Version
Range: Function:
0* [0 - 5 ] View the combined SW version (or
package version) consisting of
power SW and control SW.
15-44 Ordered Typecode String
Range: Function:
0* [0 - 40 ] View the type code string used for
reordering the frequency converter
in its original conguration.
15-45 Actual Typecode String
Range: Function:
0* [0 - 40 ] View the actual type code string.
15-46 Frequency Converter Ordering No
Range: Function:
0* [0 - 8 ] View the 8-digit order number used
for reorder the frequency converter
in its original conguration. To
restore the order number after the
power card exchange, see
parameter 14-29 Service Code.
15-47 Power Card Ordering No
Range: Function:
0* [0 - 8 ] View the power card order number.
15-48 LCP Id No
Range: Function:
0* [0 - 20 ] View the LCP ID number.
15-49 SW ID Control Card
Range: Function:
0* [0 - 20 ] View the control card software
version number.
15-50 SW ID Power Card
Range: Function:
0* [0 - 20 ] View the power card software
version number.
15-51 Frequency Converter Serial Number
Range: Function:
0* [0 - 10 ] View the frequency converter serial
number.
15-53 Power Card Serial Number
Range: Function:
0* [0 - 19 ] View the power card serial number.
15-58 Smart Setup Filename
Range: Function:
Size
related*
[0 - 20 ] Shows the SmartStart lename.
Parameter Descriptions Programming Guide
M0010001 Danfoss A/S © 10/2019 All rights reserved. 161
3 3

Danfoss vlt FC 102 Specifications

General

Category	DC Drives
Model	Danfoss VLT FC 102
Output voltage range	0 to rated motor voltage
Power range	0.37 kW to 200 kW
Communication interfaces	RS-485
Protection features	Overvoltage, undervoltage, overcurrent, short circuit, earth fault, overtemperature, motor thermal protection
Cooling method	Air-cooled
Enclosure rating	IP20, IP21, IP55 (depending on model)
Approvals	CE, UL, cUL