Danfoss vlt FC 102 - Page 164

15-59 Filename
Range: Function:
Size
related*
[0 - 16 ] CSIV Filename readout.
3.15.6 15-6* Option Ident.
This read-only parameter group contains information about
the hardware and software conguration of the options
installed in slots A, B, C0, and C1.
15-60 Option Mounted
Array [8]
Range: Function:
0* [0 - 30 ] Shows the type of the installed
option.
15-61 Option SW Version
Array [8]
Range: Function:
0* [0 - 20 ] View the installed option software
version.
15-62 Option Ordering No
Array [8]
Range: Function:
0* [0 - 8 ] Shows the order number for the
installed options.
15-63 Option Serial No
Array [8]
Range: Function:
0* [0 - 18 ] View the installed option serial
number.
15-70 Option in Slot A
Range: Function:
0* [0 - 30 ] View the type code string for the
option installed in slot A, and a
translation of the type code string.
For example, type code string AX
means no option.
15-71 Slot A Option SW Version
Range: Function:
0* [0 - 20 ] View the software version for the
option installed in slot A.
15-72 Option in Slot B
Range: Function:
0* [0 - 30 ] View the type code string for the
option installed in slot B, and a
translation of the type code string.
15-72 Option in Slot B
Range: Function:
For example, for type code string
BX, the translation is No option.
15-73 Slot B Option SW Version
Range: Function:
0* [0 - 20 ] View the software version for the
option installed in slot B.
15-74 Option in Slot C0/E0
Range: Function:
0* [0 - 30 ] View the type code string for the
option installed in slot C, and a
translation of the type code string.
For example, type code string
CXXXX means no option.
15-75 Slot C0/E0 Option SW Version
Range: Function:
0* [0 - 20 ] View the software version for the
option installed in slot C.
15-76 Option in Slot C1/E1
Range: Function:
0* [0 - 30 ] Shows the type code string for the
options (CXXXX if there is no
option).
15-77 Slot C1/E1 Option SW Version
Range: Function:
0* [0 - 20 ] Software version for the installed
option in option slot C.
15-80 Fan Running Hours
Range: Function:
0 h* [0 -
2147483647 h]
View how many hours the heat sink
fan has run (increments for every
hour). The value is saved when the
frequency converter is turned o.
15-81 Preset Fan Running Hours
Range: Function:
0 h* [0 - 99999 h] Enter the preset fan running hours
counter, see parameter 15-80 Fan
Running Hours.
This parameter cannot be selected
via the serial port, RS485.
Parameter Descriptions
VLT
®
HVAC Drive FC 102
162 Danfoss A/S © 10/2019 All rights reserved. M0010001
33