0-20 Display Line 1.1 Small
Option: Function:
[3410] PCD 10 Write
to MCO
[3421] PCD 1 Read
from MCO
[3422] PCD 2 Read
from MCO
[3423] PCD 3 Read
from MCO
[3424] PCD 4 Read
from MCO
[3425] PCD 5 Read
from MCO
[3426] PCD 6 Read
from MCO
[3427] PCD 7 Read
from MCO
[3428] PCD 8 Read
from MCO
[3429] PCD 9 Read
from MCO
[3430] PCD 10 Read
from MCO
[9913] Idle time
[9914] Paramdb
requests in
queue
[9920] Fan Ctrl deltaT
[9921] Fan Ctrl
Tmean
[9922] Fan Ctrl NTC
Cmd
[9923] Fan Ctrl i-term
[9924] Rectier
Current
[9952] PC Debug 0
[9953] PC Debug 1
[9954] PC Debug 2
[9961] FPC Debug 0
[9962] FPC Debug 1
[9963] FPC Debug 2
[9964] FPC Debug 3
[9965] FPC Debug 4
0-21 Display Line 1.2 Small
Select a variable for display in line 1, middle position.
Option: Function:
[1614] * Motor Current The options are the same as those listed
in parameter 0-20 Display Line 1.1 Small.
3.2.5 0-21 Display Line 1.2 Small
0-21 Display Line 1.2 Small
Option: Function:
[0] None
[15] Readout:
actual setup
[37] Display Text 1
[38] Display Text 2
[39] Display Text 3
[89] Date and Time
Readout
[953] Probus
Warning Word
[1005] Readout
Transmit Error
Counter
[1006] Readout
Receive Error
Counter
[1007] Readout Bus
O Counter
[1013] Warning
Parameter
[1115] LON Warning
Word
[1117] XIF Revision
[1118] LonWorks
Revision
[1230] Warning
Parameter
[1397] Alert Alarm
Word
[1398] Alert Warning
Word
[1399] Alert Status
Word
[1500] Operating
hours
[1501] Running Hours
[1502] kWh Counter
[1580] Fan Running
Hours
[1600] Control Word
[1601] Reference
[Unit]
[1602] Reference [%]
[1603] Status Word
[1605] Main Actual
Value [%]
[1609] Custom
Readout
[1610] Power [kW]
[1611] Power [hp]
[1612] Motor Voltage
Parameter Descriptions Programming Guide
M0010001 Danfoss A/S © 10/2019 All rights reserved. 35
3 3
To Next Page
Loading...
Need help?
General
