Danfoss VLT Micro Drive FC 51 - FC 51 De-Coupling Plate Mounting Instruction for M3

4.1.11 FC 51 De-coupling Plate Mounting Instruction for M3
Step 1
Mount de-coupling plate on frequency converter and
fasten with two screws. Tightening torque: 2 Nm.
Illustration 4.22
Illustration 4.23
Step 2
VLT
®
Micro frequency converter FC 51 mounted with de-
coupling plate.
Illustration 4.24
VLT
®
Micro Drive Selection VLT
®
Micro Drive FC 51 Design Guide
36 MG02K202 - VLT
®
is a registered Danfoss trademark
44
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com