Danfoss VLT Micro Drive FC 51 Design Guide

4.1.12 FC 51 De-coupling Plate Mounting Instruction for M4 and M5
Step 1
Mount metal plate on and fasten with two screws.
Tightening torque: 2 Nm.
Illustration 4.25
Step 2
VLT
®
Micro frequency converter FC 51 mounted with de-
coupling plate.
Illustration 4.26
Step 3
Mount bracket on de-coupling plate.
Illustration 4.27
VLT
®
Micro Drive Selection VLT
®
Micro Drive FC 51 Design Guide
MG02K202 - VLT
®
is a registered Danfoss trademark
37
4 4
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com

Danfoss VLT Micro Drive FC 51 Specifications

General

Enclosure	IP20
Output Voltage	0-100% of supply voltage
Altitude	Up to 1000 m without derating
Power Range	0.18-22 kW
Control Method	V/f
Communication	Modbus RTU
Protection Features	Over-voltage, under-voltage, over-current, over-temperature
Ambient Temperature	-10°C to 50°C
Storage Temperature	-25°C to 65°C
Relative Humidity	5-95% (non-condensing)
Input Voltage	200-240 V, 380-480 V
Braking Function	Integrated braking chopper (optional)