Danfoss VLT Micro Drive FC 51 Design Guide

NOTE
•
Reduce common mode interferences by
establishing a low impedance current path to the
VLT
®
Micro Drive.
•
To ensure optimum EMC performance, use a De-
Coupling plate kit (ordering numbers 132B0106
or 132B0107)
For voltage rating, wire size and fuse selection, see the
VLT
®
Micro Drive Quick Guide, MG02B.
4.1.17 Dimensions
100
+10
0
300
+20
0
M6
1
W
PE
d
LOAD
LINE
5.5
h1
l1
h2
7.8
W1
W2
l2
h
l2
h3
Ø11
Ø5.5
M4(3x)
130BC163.10
Illustration 4.34
Frame M1 M2 M3 Unit
w 70 75 90 mm
d 55 65 69 mm
h 190 210 300 mm
h3 230 250 340 mm
w1 40 40 55.6 mm
h1 213 233 323 mm
w2 55 59 69 mm
h2 140 166.5 226 mm
l1 45 38.5 68 mm
l2 7.6 8 9.3 mm
PE M6 M6 M6 metric
Weight 2 3 5 kg
Table 4.8
VLT
®
Micro Drive Selection VLT
®
Micro Drive FC 51 Design Guide
40 MG02K202 - VLT
®
is a registered Danfoss trademark
44
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com

Danfoss VLT Micro Drive FC 51 Specifications

General

Enclosure	IP20
Output Voltage	0-100% of supply voltage
Altitude	Up to 1000 m without derating
Power Range	0.18-22 kW
Control Method	V/f
Communication	Modbus RTU
Protection Features	Over-voltage, under-voltage, over-current, over-temperature
Ambient Temperature	-10°C to 50°C
Storage Temperature	-25°C to 65°C
Relative Humidity	5-95% (non-condensing)
Input Voltage	200-240 V, 380-480 V
Braking Function	Integrated braking chopper (optional)