D-100 MK2 User Manual Firmware V-6.3
K96D01-EN - 50 -
Remote Start/Remote Stop events: recorded when mains status is changed
Engine started/stopped events: recorded when engine status is changed
Genset on_load/off_load events: recorded when the genset loading status is changed
Event logs are also displayed within the main screen. Press button to find event record screen.
When displaying event logs, button will display the next event.
Alarms are displayed with their numbers and engine hour on event log screen.
Press to navigate
between screens.
To Next Page
Loading...
Need help?
General
