Datakom D-100 MK2 User Manual

D-100 MK2 User Manual Firmware V-6.3
K96D01-EN - 51 -
The unit provides a set of non-resettable incremental counters for statistical purposes.
The counters consist on:
-total genset kWh
-total genset kVArh inductive
-total genset kVArh capacitive
-total genset export kWh
-total mains kWh
-total mains kVArh
-total mains kVAh
-total engine hours
-total engine starts
-total fuel filled in the tank
-engine hours to service-1
-time to service-1
-engine hours to service-2
-time to service-2
-engine hours to service-3
-time to service-3
These counters are kept in a non-volatile memory and are not affected from power failures.
The unit is capable to display the actual fuel consumption of the engine through J1939 fuel consumption
information
If the engine is sending the fuel rate through J1939 messaging, then the unit will directly display the fuel
consumption information coming from the ECU.
Related parameters are:
Parameter Definition
Unit
Min
Max
Required
Value
Description
Fuel Counter Unit
Lt/gal
-
-
any
This is the unit for the fuel counter
12.2. FUEL CONSUMPTION MONITORING
12.1. -
12. STATISTICAL COUNTERS

Datakom D-100 MK2 Specifications

General

Brand	Datakom
Model	D-100 MK2
Category	Controller
Language	English