Datakom D-100 MK2 User Manual

D-100 MK2 User Manual Firmware V-6.3
K96D01-EN - 121 -
The unit conforms to the EU directives
-2014/35/EC (low voltage)
-2014/30/EC (electro-magnetic compatibility)
Norms of reference:
EN 61010 (safety requirements)
EN 61326 (EMC requirements)
The CE mark indicates that this product complies with the European requirements for safety,
health environmental and customer protection.
Wipe the unit, if necessary with a soft damp cloth. Do not use chemical agents
Following DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 27 January 2003 on waste electrical and electronic equipment (WEEE), this unit should be stored and disposed
separately from the usual waste.
The European ROHS directive restricts and prohibits the use of some chemical materials in electronic
devices.
Following the “DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of
8 June 2011 on the restriction of the use of certain hazardous substances in electrical and
electronic equipment”, this product is listed in annex-I under category: “Monitoring and control
instruments including industrial monitoring and control instruments” and exempted from ROHS
directive.
However Datakom is not using any ROHS uncompliant electronic components in the production. Only the
solder contains lead. The switching to unleaded soldering is in progress.
30. ROHS COMPLIANCE
29. DISPOSAL OF THE UNIT
DO NOT OPEN THE UNIT !
There are NO serviceable parts inside the unit.
28. MAINTENANCE
27. DECLARATION OF CONFORMITY

Datakom D-100 MK2 Specifications

General

Brand	Datakom
Model	D-100 MK2
Category	Controller
Language	English