Enter/Exit Programming Mode
90
PowerScan™ PD9130/PBT9100/PM9100
UPC/EAN GLOBAL SETTINGS
This section provides configuration settings for UPC-A, UPC-E, EAN 13 sym-
bologies, and affects all of these unless otherwise marked for each feature
des
cription.
UPC/EAN Decoding Levels
Decoding Levels are used to configure a bar code symbology decoder to be
very aggressive to very conservative depending on a particular customer’s
needs
UPC/EAN Decoding Level = 1
UPC/EAN Decoding Level = 2
UPC/EAN Decoding Level = 3
UPC/EAN Decoding Level = 4
UPC/EAN Decoding Level = 5
To Next Page
Loading...
Need help?
General
