Enter/Exit Programming Mode
Product Reference Guide
111
Code 128 Sub-Code Exchange Transmission
Enables/disables the transmission of “Sub-Code Exchange” characters (NOT
transmitted by standard decoding).
DEFAULT
Code 128 Sub-Code Exchange Transmission = Disable
Code 128 Sub-Code Exchange Transmission = Enable
Code 128 Quiet Zones
This feature specifies the number of quiet zones for Code 128 labels. Quiet
zones are blank areas at the ends of a bar code and are typically 10 times
the width of the narrowest bar or space in the label.
Code 128 Quiet Zones = No Quiet Zones
Code 128 Quiet Zones = Quiet Zone on one side
Code 128 Quiet Zones = Quiet Zones on two sides
Code 128 Quiet Zones = Auto
Code 128 Quiet Zones = Virtual Quiet Zones on two sides
To Next Page
Loading...
Need help?
General
