Datalogic PowerScan 9100 Series User Manual

Enter/Exit Programming Mode
Product Reference Guide 123
I 2 of 5 Check Character Transmission
Enable this option to transmit the check character along with I 2 of 5 bar
code data.
I 2 of 5 Check Character Transmission = Don’t Send
I 2 of 5 Check Character Transmission = Send
DEFAULT
This feature is valid only when I 2 of 5 Check Character Calculation is enabled.
I 2 of 5 Minimum Reads
This feature specifies the minimum number of consecutive times an I 2 of 5
label must be decoded before it is accepted as good read.
I 2 of 5 Minimum Reads = 1
I 2 of 5 Minimum Reads = 2
DEFAULT
I 2 of 5 Minimum Reads = 3
I 2 of 5 Minimum Reads = 4

Datalogic PowerScan 9100 Series Specifications

General

Brand	Datalogic
Model	PowerScan 9100 Series
Category	Barcode Reader
Language	English