Datalogic PowerScan 9100 Series

Enter/Exit Programming Mode
168 PowerScan™ PD9130/PBT9100/PM9100
GS1 DATABAR™ OMNIDIRECTIONAL
The following options apply to the GS1 DataBar™ Omnidirectional (formerly
RSS-14) symbology.
GS1 DataBar™ Omnidirectional Enable/Disable
When disabled, the reader will not read GS1 DataBar™ Omnidirectional bar
codes.
DEFAULT
GS1 DataBar™ Omnidirectional = Disable
GS1 DataBar™ Omnidirectional = Enable
GS1 DataBar™ Omnidirectional GS1-128 Emulation
When enabled, GS1 DataBar™ Omnidirectional bar codes will be translated to
the GS1-128 label data format.
DEFAULT
GS1 DataBar™ Omnidirectional GS1-128 Emulation =
Disable
GS1 DataBar™ Omnidirectional GS1-128 Emulation = Enable