Enter/Exit Programming Mode
Product Reference Guide
121
ISBT 128 Advanced Concatenation Options
To set up pairs of label types for concatenation, use the Datalogic Aladdin configura-
tion application or contact Datalogic Technical Support, as described on
page 2
.
INTERLEAVED 2 OF 5 (I 2 OF 5)
The following options apply to the I 2 of 5 symbology.
CAUTION
When reading this symbology, the settings for I 2 of 5 Length Control AND I 2 of 5
Check Character Calculation MUST be enabled to increase decoding safety.
I 2 of 5 Enable/Disable
When disabled, the reader will not read I 2 of 5 bar codes.
DEFAULT
I 2 of 5 = Disable
I 2 of 5 = Enable
To Next Page
Loading...
