Datalogic PowerScan 9100 Series

Enter/Exit Programming Mode
206 PowerScan™ PD9130/PBT9100/PM9100
PLESSEY (ONLY STANDARD OPTIC MODELS)
The following options apply to the Plessey symbology.
Plessey Enable/Disable
Enables/Disables ability of reader to decode Plessey labels.
DEFAULT
Plessey = Disable
Plessey = Enable
Plessey Check Character Calculation
Enables/Disables calculation and verification of an optional Plessey check
character.
Plessey Check Character Calculation = Disable
Plessey Check Character Calculation =
Enable Plessey std. check char. verification
DEFAULT
Plessey Check Character Calculation =
Enable Anker check char. verification
Plessey Check Character Calculation =
Enable Plessey std. and Anker check char. verification