Datalogic PowerScan 9100 Series User Manual

Enter/Exit Programming Mode
Product Reference Guide 233
Power Off
See Power Off on page 20 for information about this feature.
Powerdown Timeout
The Powerdown Timeout feature sets the time for automatically switching
the unit off when the imager has been idle.
Powerdown Timeout = Disable
Powerdown Timeout = 10 minutes
Powerdown Timeout = 20 minutes
Powerdown Timeout = 30 minutes
DEFAULT
DEFAULT
Powerdown Timeout = 60 Minutes (1 Hour)
Powerdown Timeout = 120 Minutes (2 Hours)

Datalogic PowerScan 9100 Series Specifications

General

Brand	Datalogic
Model	PowerScan 9100 Series
Category	Barcode Reader
Language	English