Enter/Exit Programming Mode
178
PowerScan™ PD9130/PBT9100/PM9100
Code 93 Check Character Transmission
Enables/disables transmission of an optional Code 93 check character.
Code 93 Check Character Transmission = Disable
Code 93 Check Character Transmission = Enable
DEFAULT
Code 93 Length Control
This feature specifies either variable length decoding or fixed length decod-
ing for the Code 93 symbology.
Variable Length:
For variable length decoding, a minimum and maximum
length may be set.
Fixed Length:
For fixed length decoding, two different lengths may be set.
Code 93 Length Control = Variable Length
Code 93 Length Control = Fixed Length
To Next Page
Loading...
