Datalogic PowerScan 9100 Series

Enter/Exit Programming Mode
142 PowerScan™ PD9130/PBT9100/PM9100
Industrial 2 of 5 Check Character Transmission
Enables/disables transmission of an Industrial 2 of 5 check character.
Industrial 2 of 5 Check Character Transmission = Disable
Industrial 2 of 5 Check Character Transmission = Enable
DEFAULT
Industrial 2 of 5 Length Control
This feature specifies either variable length decoding or fixed length decod-
ing for the Industrial 2 of 5 symbology.
Variable Length: For variable length decoding, a minimum and maximum
length may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
DEFAULT
Industrial 2 of 5 Length Control = Variable Length
Industrial 2 of 5 Length Control = Fixed Length