Datalogic PowerScan 9100 Series User Manual

Enter/Exit Programming Mode
Product Reference Guide 27
Stop Bits
Set the number of stop bits to match host device requirements. See
page 286 for more information on
this feature.
DEFAULT
1 Stop Bit
2 Stop Bits
Parity
This feature specifies parity required for sending and receiving data. Select
the parity type according to host device requirements. See page 286 for
more information.
DEFAULT
Parity = None
Parity = Even
Parity = Odd

Datalogic PowerScan 9100 Series Specifications

General

Brand	Datalogic
Model	PowerScan 9100 Series
Category	Barcode Reader
Language	English