Enter/Exit Programming Mode
160
PowerScan™ PD9130/PBT9100/PM9100
CODE 11 (ONLY STANDARD OPTIC MODELS)
The following options apply to the Code 11 symbology.
Code 11 Enable/Disable
When disabled, the reader will not read Code 11 bar codes.
Code 11 = Disable
Code 11 = Enable
Code 11 Check Character Calculation
This option enables/disables calculation and verification of optional Code
11 check character.
Code 11 Check Character Calculation = Disable
Code 11 Check Character Calculation = Check C
Code 11 Check Character Calculation = Check K
Code 11 Check Character Calculation = Check C and K
DEFAULT
To Next Page
Loading...
