Enter/Exit Programming Mode
Product Reference Guide
217
WIRELESS BEEPER FEATURES
Several options are available to configure beeper behavior for RF operation.
Good Transmission Beep
Enables/disables the Good Transmission Beep indication. When enabled, a
beep occurs when a Label is correctly transmitted to the base.
Good Transmission Beep = Disable
Good Transmission Beep = Enable
Beep Frequency
Adjusts radio-specific beep indications to sound at a low, medium or high
frequency, selectable from the list below (controls the beeper’s pitch/tone).
DEFAULT
Beep Frequency = Low
Beep Frequency = Medium
Beep Frequency = High
To Next Page
Loading...
Need help?
General
