Datalogic QuickScan L QD 2300 - Code 39 Check Digit Verification; Transmit Code 39 Check Digit

Symbologies
116 QuickScan
®
L
Code 39 Check Digit Verification
When this feature is enabled, the scanner checks the integrity of all Code 39 bar codes to
verify that the data complies with specified check digit algorithm. Only Code 39 bar
codes which include a modulo 43 check digit are decoded. Enable this feature if the Code
39 bar codes contain a Modulo 43 check digit.
Transmit Code 39 Check Digit
Scan the appropriate bar code below to transmit Code 39 data with or without the check
digit.
Enable Code 39 Check Digit
*Disable Code 39 Check Digit
NOTE
Code 39 Check Digit Verification must be enabled for this parameter to func-
tion.
Transmit Code 39 Check Digit
(Enable)
*Do Not Transmit Code 39 Check Digit
(Disable)