Datalogic QuickScan L QD 2300 - Stand Mode Timeout Period

General Features
24 QuickScan
®
L
Stand Mode Timeout Period
The Timeout Period for the transition from low power to sleep mode can be set to one
of the following durations:
•1 Hour
•5 Hours (default)
• Infinite Timeout — With this setting, there is no timeout, thus the scanner will never go
into sleep mode or beam shut-off but will remain in low power mode until a label is read.
Stand Mode Timeout Period = 1 Hour
*Stand Mode Timeout Period = 5 Hours
Stand Mode Timeout Period = Infinite Timeout