Keyboard Wedge Host Parameters
Product Reference Guide 63
Function Key Mapping
ASCII values under 32 are normally sent as control key sequences (see Table 10 on page
64
). When this parameter is enabled, the keys in bold are sent in place of the standard
key mapping. Table entries that do not have a bold entry remain the same whether or
not this parameter is enabled.
FN1 Substitution
When enabled, the scanner replaces FN1 characters in an EAN128 bar code with a key-
stroke chosen by the user (see FN1 Substitution Values on page 30).
Send Make and Break
When enabled, the scan codes for releasing a key are not sent.
Enable Function Key Mapping
*Disable Function Key Mapping
Enable FN1 Substitution
*Disable FN1 Substitution
*Send Make and Break Scan Codes
Send Make Scan Code Only
To Next Page
Loading...
Need help?
General
