Datalogic QuickScan L QD 2300 - Convert I 2 of 5 to EAN-13; Discrete 2 of 5 (DTF); Enable;Disable Discrete 2 of 5

Symbologies
130 QuickScan
®
L
Convert I 2 of 5 to EAN-13
Enable this parameter to convert 14-character I 2 of 5 codes to EAN-13, and transmit to
the host as EAN-13. To accomplish this, the I 2 of 5 code must be enabled, and the code
must have a leading zero and a valid EAN-13 check digit.
Discrete 2 of 5 (DTF)
Enable/Disable Discrete 2 of 5
To enable or disable Discrete 2 of 5, scan the appropriate bar code below.
Convert I 2 of 5 to EAN-13
(Enable)
*Do Not Convert I 2 of 5 to EAN-13
(Disable)
Enable Discrete 2 of 5
*Disable Discrete 2 of 5