Datum Systems M7 Series - Page 121

M7/M7L/M7LT Modular Satellite Modem Maintenance
M7/M7L/M7LT - Rev. 0.05 3-65
E7 Interface Parameters
Representation
Type
Entry
Description
Stats Send Idle Bytes
9.374E3
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicates the number of Idle
Bytes sent
Stats Send Idle Usage
1.71%
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicates the percentage of the
WAN link that is used by the Idle
packets
Stats Send Total Packets
7.812E7
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicated the total number of
packets send for all data types
Stats Send Total Sec.
9.934E3
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicated the number of seconds
since the status counter was
reset.
Stats Rcv Data PPS
38.871 kpps
Read Only
Indicates the Rcv rate of the
Ethernet Data traffic
Stats Rcv Data Packets
7.812E7
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicates the number of Ethernet
packets received
Stats Rcv Data Bytes
9.374E9
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicates the number of Ethernet
Bytes received
Stats Rcv Data Usage
80.42%
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicates the percentage of the
WAN link that is used by the
Ethernet port
Stats Rcv MCC Packets
3.413E3
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicates the number of MCC
packets received
Stats Rcv MCC Bytes
9.374E4
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicates the number of MCC
Bytes received
Stats Rcv MCC Usage
18.56%
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicates the percentage of the
WAN link that is used by the
MCC port
Stats Rcv Idle Packets
3.413E3
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicates the number of Idle
packets received
Stats Rcv Idle Bytes
9.374E3
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicates the number of Idle
Bytes received
Stats Rcv Idle Usage
1.71%
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicates the percentage of the
WAN link that is used by the Idle
packets
Stats Rcv Total Packets
7.812E7
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicated the total number of
packets received for all data
types
Stats Rcv Total Erred
1.282E3
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicates the number of errored
packets
Stats Rcv Total PER
1.641E-5
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicates the packet error rate
Stats Rcv Total Sec.
4.551E4
Read Only
Press “Edit” then "Enter"
to reset the counter
Indicated the number of seconds
since the status counter was
reset