Datum Systems M7 Series - Page 91

M7/M7L/M7LT Modular Satellite Modem Maintenance
M7/M7L/M7LT - Rev. 0.05 3-35
Unit Parameters
Representation
Type
Entry
Description
Front Panel LCD Active
Backlight Full
Selection
0 = 13%, 1 = 25%, 2 = 38%, 3
= 50%, 4 = 63%, 5 = 75%, 6 =
88%, 7 = Full
Active level of LCD backlight
Front Panel LCD Idle
25%
Selection
0 = off, 1 = 13%, 2 = 25%, 3 =
38%, 4 = 50%
Idle level of LCD backlight
Front Panel Activity
Beep
Selection
0 = None,
1 = Beep,
2 = Blink Online Lamp,
3 = Beep & Blink Online
Audible “beep” and/or “Online”
LED Blink on front panel key
press.
HTTP Server Mode
Full Access
Selection
0 = Disable,
1 = Read Only,
2 = Full Access.
Control access and mode to
the Web Browser.
HTTP Read User Name
Admin
Alpha –
Numeric
Enter up to 24 characters
HTTP read only access user
name
HTTP Read Password
Guest
Alpha –
Numeric
Enter up to 24 characters
HTTP read only access
password
HTTP Full User Name
Admin
Alpha –
Numeric
Enter up to 24 characters
HTTP full access user name
HTTP Full Password
Datum
Alpha –
Numeric
Enter up to 24 characters
HTTP full access password
HTTP Activity
Blink Online Lamp
Selection
0 = None,
1 = Beep,
2 = Blink Online Lamp,
3 = Beep & Blink Online
Audible “beep” and/or “Online”
LED Blink on HTTP port
activity.
HTTP Web Version
1.1.1q
Read Only
Read from Web Browser
Display of the current Web
Browser version.
SNMP Server Mode
Full Access
Selection
0 = Disable,
1 = Read Only,
2 = Full Access.
Control access and mode to
the SNMP Server
SNMP Server Type
V2c
Selection
0 = V1
1 = V2c
Set the SNMP Server type
SNMP Server Port Number
161
Numeric
1 to 65535
161 = IANA
Set the Internet socket port
number for the SNMP server
SNMP Read Only Community
public
Alpha –
Numeric
Up to 24 characters and can
contain any combination of
alphanumeric characters,
hyphens (-), and underscore
characters (_).
Set the Read-Only community
name for authentication for
SNMP traffic.
SNMP Read/Write Community
private
Alpha –
Numeric
Up to 24 characters and can
contain any combination of
alphanumeric characters,
hyphens (-), and underscore
characters (_).
Set the Read-Write
community name for
authentication for SNMP
traffic.