Removing and Installing components
Topics:
• Recommended tools
• Screw size list
• System board layout
• Rubber feet
• Cable cover - optional
• Stand
• Back cover
• Hard drive
• Memory module
• System board shield
• Intel Optane
• Solid State Drive -SSD
• WLAN card
• System fan
• Pop-Up Camera
• Coin cell battery
• Heat sink
• Processor
• Base cover
• Power supply unit - PSU
• Power supply unit fan - PSU fan
• Input and Output bracket
• System board
• Speakers
• Power button board
• Microphones
• Input and Output board
• Headset port
• Antennas
• Display panel
• Display cable
• Middle frame
Recommended tools
The procedures in this document require the following tools:
• Phillips #0 screwdriver
• Phillips #1 screwdriver
3
14 Removing and Installing components
To Next Page
