3 Follow the procedure in After working inside your computer
Stand
Removing the stand
The following procedure applies only to systems that are shipped with a Basic All-in-One stand:
1 Follow the procedure in Before working inside your computer.
2 To avoid damaging the display, place the system on a at, soft, and clean surface .
3 To remove the stand:
a Press and slide the release tab forward on the cover [1].
b Hold the tab in the release position and lift the stand upward [2].
c Slide downward to lift the stand o the back cover [3].
Removing and Installing components
21
To Next Page
Loading...
