2 Install the following components:
a Speakers
b I/O bracket
c Base cover
d System board shield
e Back cover
f Stand
3 Follow the procedure in After working inside your computer.
Microphones
Removing the microphones
1 Follow the procedure in Before working inside your computer.
2 Remove the following components:
a Stand
b Back cover
c System board shield
d Base cover
e I/O bracket
f Speakers
g PSU
3 To remove the microphone and cable:
a Disconnect the microphone module cable from the system board [1].
b Remove the microphone module cable from the routing guides on the display assembly base [2].
Removing and Installing components
75
To Next Page
Loading...
