Dell PowerConnect 3524P - Page 281

Configuring Switch Information 281
3 Define the relevant fields.
4 Click Apply Changes . The IP based protocol is defined, and the device is updated.
Displaying the ACEs Associated with IP based ACLs
1 Open the Network Security - IP Based ACL page.
2 Click Show All.
The ACEs Associated with IP-ACL opens.
Figure 7-11. ACEs Associated with IP-ACL
Removing an IP based ACL
1 Open the Network Security - IP Based ACL page.
2 Click Show All. The ACEs Associated with IP-ACL Table opens.
3 Check the Remove ACL checkbox.
4 Click Apply Changes .
Removing an IP based ACE
1 Open the Network Security - IP Based ACL page.
2 Click Show All. The ACEs Associated with IP-ACL Table opens.
3 Check the Remove checkbox next to an ACE.
4 Click Apply Changes .