Dell PowerConnect 3524P

366 Configuring Switch Information
3 Complete the fields on the page.
4 Click Apply Changes .
The protocol group is assigned, and the device is updated.
Assigning VLAN Protocol Group Settings
1 Open the Protocol Group page.
2 Complete the fields on the page.
3 Click Apply Changes .
The VLAN protocol group parameters are defined, and the device is updated.
Removing Protocols From the Protocol Group Table
1 Open the Protocol Group page.
2 Click Show All .
The
Protocol Group Table opens.
Figure 7-56. Protocol Group Table
3 Select Remove for the protocol groups that need to be removed.
4 Click Apply Changes .
The protocol is removed, and the device is updated.