Dell PowerConnect 5424

Configuring System Information 201
Figure 6-86. Access Control Group
• Group Name — The user-defined group to whom access control rules are applied. The field range is up
to 30 characters.
•
Security Model — Defines the SNMP version attached to the group. The possible field values are:
–
SNMPv1 — SNMPv1 is defined for the group.
–
SNMPv2 — SNMPv2 is defined for the group.
–
SNMPv3 — SNMPv3 is defined for the group.
–
Security Level — The security level attached to the group. Security levels apply to SNMPv3 only.
The possible field values are:
–
No Authentication — Neither the Authentication nor the Privacy security levels are assigned to
the group.
–
Authentication — Authenticates SNMP messages, and ensures the SNMP messages origin is
authenticated.
–
Privacy — Encrypts SNMP messages.
•
Operation — Defines the group access rights. The possible field values are:
–
Read — The management access is restricted to read-only, and changes cannot be made to the
assigned SNMP view.
–
Write — The management access is read-write and changes can be made to the assigned
SNMP view.
–
Notify — Sends traps for the assigned SNMP view.