264 Configuring Device Information
•
Destination Address
— Matches the destination MAC address to which packets are addressed to the
ACE. Wildcard masks specify which bits are used and which bits are ignored. A wildcard of 0.0.0.0
indicates that all the bits are important.
•
VLAN ID
— Matches the packet’s VLAN ID to the ACE. The possible field values are 1 to 4095.
•
CoS
— Indicates the CoS values by which the packets are filtered.
•
Cos Mask
— Indicates the CoS Mask by which the packets are filtered.
•
Ethertype
— Indicates the Ethertype packet by which the packets are filtered.
•
Action
— Indicates the ACL forwarding action. Possible field values are:
–
Permit
— Forwards packets which meet the ACL criteria.
–
Deny
— Drops packets which meet the ACL criteria.
–
Shutdown
— Drops packet that meet the ACL criteria, and disables the port to which the packet
was addressed.
Adding ACEs to IP based ACLs
1
Open the
Network Security - MAC Based ACL
page.
2
Select an ACL.
3
Edit the relevant fields.
4
Click
Apply Changes
.
To Next Page
Loading...
