Dell PowerConnect 5424 User Manual

Configuring Device Information 265
Adding MAC based ACLs
1 Open the MAC Based ACL page.
2 Click Add .
The
Network Security - MAC Based ACL page opens:
Figure 7-13. Add Mac Based ACL
3 Define the relevant fields.
4 Click Apply Changes . The MAC based protocol is defined, and the device is updated.

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation