Dell PowerConnect 5424

288 Configuring Device Information
autobaud
Sets the line for automatic baud rate detection.
negotiation
Enables auto negotiation operation for the
speed and duplex parameters of a given
interface.
back-pressure
Enables Back Pressure on a given interface.
flowcontrol {auto | on |
off | rx | tx}
Configures the Flow Control on a given
interface.
show interfaces
configuration [ethernet
interface | port-channel
port-channel-number ]
Displays the configuration for all configured
interfaces.
show interfaces status
[ethernet
interface
|port-channel port-
channel-number
]
Displays the status for all configured interfaces.
show interfaces
description [ethernet
interface |port-channel
port-channel-number ]
Displays the description for all configured
interfaces.
show interfaces port-
channel [
port-channel-
number
]
Displays Port-channel information (which ports
are members of that port-channel, and whether
they are currently active or not).
Table 7-13. LAG Configuration CLI Commands (continued)
CLI Command Description