Configuring Device Information 291
Displaying the Storm Control Table
1
Open the
Storm Control
page.
2
Click
Show All
.
The
Storm Control Table
opens:
Figure 7-27. Storm Control Table
Configuring Storm Control with CLI Commands
The following table summarizes the equivalent CLI commands for configuring Storm Control as
displayed on the Storm Control page.
Table 7-14. Storm Control CLI Commands
CLI Command Description
port storm-control include-multicast Enables the device to count Multicast
packets together with broadcast packets.
port storm-control broadcast enable Enables broadcast storm control.
port storm-control broadcast rate
rate
Configures the maximum broadcast rate.
show ports storm-control [ethernet interface]
Displays the storm control configuration.
To Next Page
Loading...
