Dell PowerConnect 5424

342 Configuring Device Information
Configuring GVRP Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring GVRP as displayed in the
GVRP Global Parameters page.
Table 7-32. GVRP Global Parameters CLI Commands
CLI Command Description
gvrp enable (global) Enables GVRP globally.
gvrp enable (interface) Enables GVRP on an interface.
gvrp vlan-creation-forbid Enables or disables dynamic VLAN
creation.
gvrp registration-forbid De-registers all dynamic VLANs, and
prevents dynamic VLAN registration on
the port.
show gvrp configuration [ethernet
interface| port-channel port-channel-
number]
Displays GVRP configuration information,
including timer values, whether GVRP and
dynamic VLAN creation is enabled, and
which ports are running GVRP.
show gvrp error-statistics [ethernet
interface| port-channel port-channel-
number]
Displays GVRP error statistics.
show gvrp statistics [ethernet
interface| port-channel port-channel-
number]
Displays GVRP statistics.
clear gvrp statistics [ethernet
interface| port-channel port-channel-
number]
Clears all the GVRP statistics information.