Dell PowerConnect 5424

408 Viewing Statistics
Viewing LAG Statistics Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing LAG statistics.
Table 8-12. LAG Statistic CLI Commands
CLI Command Description
show interfaces counters
[ethernet interface | port-channel port-channel-
number
]
Displays traffic seen by the
physical interface.
show rmon statistics
{ethernet interface | port-channel port-channel-number} Displays RMON Ethernet
statistics.
show gvrp statistics
{ethernet interface | port-channel port-channel-number} Displays GVRP statistics.
show gvrp error-statistics
{ethernet interface | port-channel port-channel-
number
}
Displays GVRP error
statistics.
Console# show gvrp statistics
GVRP statistics:
----------------
rJE : Join Empty Received rJIn : Join In Received
rEmp : Empty Received rLIn : Leave In Received
rLE : Leave Empty Received rLA : Leave All Received
sJE : Join Empty Sent sJIn : Join In Sent
sEmp : Empty Sent sLIn : Leave In Sent
sLE : Leave Empty Sent sLA : Leave All Sent
Port rJE rJIn rEmp rLIn rLE rLA sJE sJIn sEmp sLIn sLE sLA
---- --- ---- ---- ---- --- --- --- ---- ---- ---- --- ---
g1000000000000
g2000000000000
g3000000000000
g4000000000000
g5000000000000
g6000000000000
g7000000000000
g8000000000000