Dell Precision 7680 - Page 101

Table 21. System setup options—Performance menu (continued)
Performance
By default, the All Cores option is enabled.
Multiple Atom Cores Enables to change the number of Atom cores available to the operating system.
By default, the All Cores option is enabled.
Intel SpeedStep
Enable Intel SpeedStep Technology Enables the system to dynamically adjust processor voltage and core
frequency, decreasing average power consumption and heat production.
By default, the option is enabled.
C-States Control
Enable C-State Control Enables the ability of the CPU to enter and exit low power state. When
disabled, it disabled all C-states. When enabled, it enabled all C-states that
the chipset or platform allows.
By default, the option is enabled.
Enable Adaptive C-States for Discrete
Graphics
Enables the ability of the CPU to dynamically detect high usage of a discrete
graphic and adjust system parameters for higher performance.
By default, the option is enabled.
Intel Turbo Boost Technology
Enable Intel Turbo Boost Technology Enable or disable the Intel TurboBoost mode of the processor.
By default, the option is enabled.
Intel Turbo Boost Maximum
Technology 3.0
Enable Intel Turbo Boost Maximum
Technology 3.0
Enable or disable the Intel TurboBoost maximum mode of the processor.
By default, the option is disabled.
Intel Hyper-Threading Technology
Enable Intel Hyper-Threading Technology Enable or disable Hyper-Threading in the processor.
By default, the option is enabled.
PCIe Resizeable Base Address
Register (BAR)
Platform considers to Enable this option, if there is no compatibility issue with
supported graphics card.
By default, the option is disabled.
Table 22. System setup options—System Logs menu
System Logs
BIOS Event Log
Clear Bios Event Log Displays BIOS events.
By default, the Keep Log option is enabled.
Thermal Event Log
Clear Thermal Event Log Displays Thermal events.
By default, the Keep Log option is enabled.
Power Event Log
Clear Power Event Log Displays power events.
By default, the Keep Log option is enabled.
BIOS setup 101